4 days of Mining on Windows based PC with 25 GS using premium USB3 hubs.
Still get plenty of HEs.
You guys forget that each of the machines runs well at a certain speed
I see one is screwing up for you, the rest all doing insanly well
Pick that failing one out and see if there is some cooling problem or wrongly seated coolblock
Because that one is doing 312 HW thats extreme high
In general people set one speed for all miners but that means also you do not whine about getting alot of hw errors
I have 2 gs blade miners and all 4 boards want a different speed, because board one runs perfect at 690 Mhz, board 2 likes to run at 800 Mhz board 3 runs smooth at 838 Mhz and board 4 allows me to run it at 850 Mhz. The first will i let it run at 800 pump out tons of hw errors. So not worth to keep it running at that speed.
So you either start run them at seperate speeds or accept the fact that you get alot of errors, or check the failing ones out what is causing the high errors.